Linear vibrating sieve

stainless steel linear vibrating sieve
DZSF-525-1P linear vibro sieve
DZSF-1020-1P square vibratory screen
SUS double layers linear vibrating screen

Manual Mixing:Linear vibrating sieve is an efficient new screening equipmentwhich widely used in miningcoalmetallurgybuilding materials industrytwo sets of horizontal vibration motor to be power source.

Linear vibrating screen is an efficient new screening equipment, which widely used in mining, coal, metallurgy, building materials industry, two sets of horizontal vibration motor to be power source,two synchronous motors are reversely placed so that the exciter generate reverse excitation force, the exciting force generated by eccentric block cancel each other out on the parallel direction of motor axis,and stack together with the perpendicular direction of motor axis, so its trajectory is linear.Linear vibrating screen is suitable for particle size from less than 10mm.

1. Simple structure, large screening capacity.
2. With the structure of sealing completely, no dust overflow scattered.
3. Single layer or multi-layer are both available
4. Less energy consumption,lower noise,longer service life
5. Manufactured in standard models or as per customer requirement.

Linear vibrating sieve is widely used in mining, coal, refractories, metallurgy, building materials and other industries. Mineral linear vibrating screen is usually used for the screening and grading materials in large, middle and small particles.

Model of description
D----------------------vibration moter(vibration source)
Z-----------------------linear(motion trail)
SF---------------------screening machine
1020------------------size of screen surface(W*L=1000*2000)
2-----------------------two layers( two layers of mesh three discharge hole )
S(P)------------------The steel plate material (S-stainless steel,P-plain carbon steel )

Main technical parameters and overall dimensions

How to choose suitable model for you?
1.How much is the hourly output?
2.What's the name of raw material will be screened?
3.How many layers do you need? 
4.What's the sieve mesh size of every layer?
5.What is the material of machine?(carbon steel,stainless steel or others)

►Installation and use
Linear vibrating sieve should be fixed on dedicated foundation through embedded bolts. If there is no special foundation,it should lay anti-vibration rubber plate between the working table and the equipment basement.Before using,You must be configured prior to use safe and reliable protective grounding wire.
Note:After installation is complete,before starting,must remove device that it is used for fixed screen body and machine basement.

After the installation of new linear vibrating sieve is completed, you shall check the following requirements:
1.Check vibration motor winding insulation resistance to ground,if <20MΩ must be dried before using.
2.Spring should be completely vertical embedded spring retainer to ensure that the balance of the screen body.Vibration part can not have any contact with other object of outside the machine.
3.Close the power switch,make sure the vibration motor synchronous reverse rotation,holding 10-20 minutes idling.If there is abnormal sound when the equipment is running,it should be promptly shut down for inspection.