Manual Mixing:
DZSF-525 linear vibratory grading sieve have two decks screen mesh and three discharge holeswhich made of carbon steeltwo vibrating motor of 0.37kw.It has less energy consumptionlower noise and longer service life.
►Introduce and Working principle
Linear vibratory grading sieve is consist of screen box, screen mesh frame, screen mesh, vibrating motor or vibrating exciter, motor base, damping spring, support frame etc. linear vibration screen can be widely used in metallurgy, mining, coal, power, building material, fire-resistant material industries etc.
Linear vibratory grading sieve is consist of screen box, screen mesh frame, screen mesh, vibrating motor or vibrating exciter, motor base, damping spring, support frame etc. linear vibration screen can be widely used in metallurgy, mining, coal, power, building material, fire-resistant material industries etc.
This multiple layers vibrating sieve’s driven device can be vibrating motor and vibrating exciter, which occur linear motion, to make the material move forward to each outlet.
linear vibratory grading sieve can be used universally for test screening or to produce between 2 and 4 screen fractions.Wet or friable dry material in a gentle linear vibratory action. Acts as a conveyor whilst sieving the product.
►Rough diagram
►Installation and use
►Feathers
1. Good sealing,without dust pollution;
2. Easy to change screen mesh,long service life;
3. High screening efficiency;
4. Simple structure;
5. Discharge material automatically, fit the production line;
6. The sieve box is welded by steel plate and sectional material;
7. It has good whole rigidity and runs steady.
►Model of description
D----------------------vibration moter(vibration source)
Z-----------------------linear(motion trail)
SF---------------------screening machine
525------------------size of screen surface(W*L=500*2500)
2-----------------------one layer(two layers screen mesh with three discharge holes )
P------------------The steel plate material (p-carbon steel)
►Rough diagram
►Installation and use
Linear vibratory grading sieve should be fixed on dedicated foundation through embedded bolts. If there is no special foundation,it should lay anti-vibration rubber plate between the working table and the equipment basement.Before using,You must be configured prior to use safe and reliable protective grounding wire.
Note:After installation is complete,before starting,must remove device that it is used for fixed screen body and machine basement.
After the installation of new linear vibrating sieve is completed, you shall check the following requirements:
1.Check vibration motor winding insulation resistance to ground,if <20MΩ must be dried before using.
2.Spring should be completely vertical embedded spring retainer to ensure that the balance of the screen body.Vibration part can not have any contact with other object of outside the machine.
3.Close the power switch,make sure the vibration motor synchronous reverse rotation,holding 10-20 minutes idling.If there is abnormal sound when the equipment is running,it should be promptly shut down for inspection.
