Manual Mixing:
SS flour vibrating sieve sifter is mounted with 0.25kw vertical vibrating motor.There are the diameter of 600mm,one layer screen mesh with two dischange holes.Mainly used in screening material with high output.Accept customized service.
►Introduction and working principle
SS flour vibrating sieve sifter is a kind of high precision fine powder screening machine, works by the upright motor as vibration source, installed on both ends of the motor on the eccentric hammer, the motor rotation movement into horizontal vertical slope of three dimensional movement, then pass the movement to the screen surface at the ends of the regulation on the phase Angle, can change the course of movement on the surface of the material in the screen, vibration due to its operation principle, many enterprises are also called the three dimensional vibrating screen filter, according to shape structure is part of the customers' call for circular screen, from the material point of standard sieve and normal vibration sieve, and material contact part of the standard of 304 stainless steel material, base for carbon steel material, the ordinary type of the brick for carbon steel material.
►Features
►Features
1. High efficiency, refined design, duration,any powders and mucilage are suitable for using.
2. Easily to replace the screen, simple operation and convenience washing.
3. Never jam the hole meshwork, no powder flying, filter size of the powder between 500 mesh and 0.028 mm.
4. Discharge the impurity and coarse materials automobile and operates continuously.
5. Unique screen flame design, long duration of screen, only 3-5 to replace the screen.
6. Small volume, move easily.
7. The highest layers of the screen are about 5 layers. But 3 lagers are suggested.
►Technical Parameters
►Pls provide the following information for us:
►Technical Parameters
►Pls provide the following information for us:
1. material name, the density(kg/m3), water content(%).
2. the necessary capacity you required(per hour)
3. Machine material. Pls choose one:
a. All stainless steel 304
b. All carbon steel
c. The contacting part is stainless steel,the other parts is carbon steel or spraying plastic.
d.Contact part with plastic.
4. the dimension of the machine can be designed for you.
5. Additional parts ,like the mobil wheel, removing-dust hole and noise-proof base,can be easily fixed and maintained.
6. How many layers you need??
7. Pls inform the voltage&frequency in your city.
►Machine maintenance
►Machine maintenance
Routine maintenance
1.start ago:(1)check the coarse and fine mesh with or without breakage
(2)Whether locking in each beam ring
2.during start:(1)note: whether there is abnormal noise
(2)whether the current stability
(3)whether abnormal vibration
3.after use:clean after each use.
Regular maintenance
Regular inspection coarse mesh, fine mesh and springs whether fatigue and breakage,whether all parts of the machinecause damage due to vibration, need to add lubricant section must be ubricated.
