Manual Mixing:
2-deck granule rotary vibrating sieve is mounted with 0.25kw vertical vibrating motor.There are the diameter of 600mm,two layer screen mesh with three dischange holes.Mainly used in screening material with high output.Accept customized service.
2-deck granule rotary vibrating sieve is a kind of high precision fine powder screening machine, due to its operation principle, many enterprises are also called the three dimensional vibrating sieve filter, according to shape structure is part of the customers' call for circular sieve, from the material point of standard sieve and normal vibrating sieve, and material contact part of the standard of 304 stainless steel material, base for carbon steel material, the ordinary type of the brick for carbon steel material.
►Working principle
2-deck granule rotary vibrating sieve use upright motor as the source of vibration,equipped eccentricity hammer on the both sides of motor ,change circumrotate to level, upright and incline movement, then pass these three movement to the surface of the screen.Adjust the phasic angle on the both sides of the top and bottom to change the movement orbits of the surface screen.
►Features
1. Widely used in any powder and liquid material;
2. Easy to change mesh, convenient to clean the mesh;
3. Dust-proof ;
4. Mesh size could be 2~1000 mesh or 0.013mm~8mm;
5. Little volume, easy to install according to requirement;
6. Max. 5 layers, 3 layers is better;
7. Carbon steel , stainless steel material or customized material;
8. Little power consumption, energy conservation and environmental protection, and can be installed indoor or outdoor;
►Technical Parameters
►Technical Parameters
| Model | Power | The diameter of sieving | Voltage | RPM | Capacity |
| DH-600 | 0.25kw | 550mm | 380V | 1440r/min | 500kg/h |
►Machine maintenance
Routine maintenance
1.start ago:(1)check the coarse and fine mesh with or without breakage
(2)Whether locking in each beam ring
2.during start:(1)note: whether there is abnormal noise
(2)whether the current stability
(3)whether abnormal vibration
3.after use:clean after each use.
Regular maintenance
Regular inspection coarse mesh, fine mesh and springs whether fatigue and breakage,whether all parts of the machinecause damage due to vibration, need to add lubricant section must be ubricated.
