Chemical pigment Multilayer vibrating grading sieve

Multilayer vibrating grading sieve
800mm vibrating grading sieve
Stainless steel screen surface
The basement of vibrating grading sieve

Manual Mixing:

Multilayer vibrating grading sieve is mounted with 0.55kw vertical vibrating motor.There are the diameter of 800mm,one layer screen mesh with two dischange holes.Mainly used in screening material with high output.Accept customized service.

►Introduction and Working principle
XZS series Multilayer vibrating grading sieve uses upright motor as the source of vibration, equipped eccentricity hammer on the both sides of motor, changed circumrotate to   level, upright and incline movement, then pass these three movements to the surface of the screen. Adjust the phase angle on the both sides of the top and bottom changing the movement orbits in the surface screen.
   
►Common structure of vibrating grading sieve

►Features
1. High efficiency, refined design, duration,any powders and mucilage are suitable for using.
2. Easily to replace the screen, simple operation and convenience washing.
3. Never jam the hole meshwork, no powder flying, filter size of the powder between 500 mesh and 0.028 mm.
4. Discharge the impurity and coarse materials automobile and operates continuously.
5. Unique screen flame design, long duration of screen, only 3-5 to replace the screen.
6. Small volume, move easily.
7. The highest layers of the screen are about 5 layers. But 3 lagers are suggested.
►The Advantage of mother-son screen
1.Save time(3-5 minutes to complete screen replacement).
2.Save manpower, for replace screen just two people.
3.Increase fluency production line.
4.Increases screen life, bouncing ball does not directly strike a fine mesh.
5.Increase the screen using the area.
This machine is very simple and quick method for change screen,just follow the order shown below,no more than five minutes,can be done for replace screen.
 
►Installation and adjustment of vibrating grading sieve
1, the motor should be fastened on the mounting surface, mounting surface must be smooth, flat.
2, the motor can be installed horizontally.
3, the electrical lead-core rubber cable with four-YZ-500V, then the power cable is not allowed when there is acute Lead off, and with the vibration of the body and firmly secured.
4, electrical grounding should be reliable, the motor grounding device, lead terminal signs, can also use foot bolts solid ground.
5, the exciting force adjustments.

likeproduct