1000mm Food soybean milk GMP vibrating sieve

1000mm GMP vibrating sieve
the discharge hole of GMP vibrating sieve
soybean milk vibrating sieve
1000mm Food vibrating sieve

Manual Mixing:

Food soybean milk GMP vibrating sieve is mounted with 0.75kw vertical vibrating motor.There are the diameter of 1000mm,two layer screen mesh with three dischange holes.Mainly used in screening material with high output.Accept customized service.

►Introduction and Working principle
Food soybean milk GMP vibrating sieve use upright motor as the source of vibration,equipped eccentricity hammer on the both sides of motor ,change circumrotate to level, upright and incline movement, then pass these three movement to the surface of the screen.Adjust the phasic angle on the both sides of the top and bottom to change the movement orbits of the surface screen.
     
►Features
♦ High efficiency,design is exquisite and durable, any powder mucoid screening.
♦ Easy to change screen, easy to operate and easy to clean.
♦ Mesh is not blocked,Powder is not float in the sky,Mesh to 500 mesh or 0.028 mm.
♦ Impurity,coarse material automatic discharge;Can connect operation.
♦ Unique network frame design, screen mesh use time long, fast to replace the network only for 3 to 5 minutes.
♦ Small volume, saving space, easy to move.
♦ Screen up to five layers.
►Overall Specification
            
      Model        A        B       C       D       E        F       G       H        I
DH-1000-2S      800     700     250     970     150      120     645      895      460

►Application
Chemical industry: resin,coating,drug industry,cosmetic,oil,Herbal powder,ect.
The food industry: sugar, gourmet powder, salt, fruit juice, starch, milk powder, food, soya-bean milk, egg powder, rice, soy, fish meal, pineapple juice, etc.
Metals, metallurgical mining: aluminite powder,lead powder,copper powder,ore,alloy powder,electrode powder,abrasive powder,refraclory materials,kaolin,lime,aluminium oxide,quartz sand,ect.
►Use and maintenance
1, the machine shall be equipped with electrical protection device.
2, the machine is running early, check every day at least once a bolt to prevent loosening.
3, when the motor direction of rotation does not meet the requirements, you can adjust the power supply phase sequence.
4, the motor should guarantee good lubrication, each running about two weeks to add lithium grease (ZL-3) once, come on, through the oil by adding appropriate amount of lithium grease cup.
5, the machine running total of 1500 hours, check the bearings, if serious injury should be immediately replaced.
6, the machine parked or garaged when used again after a long time, measure the insulatio n resistance should be used to measure 500-volt megger.

likeproduct