Manual Mixing:
1800mm Automatic vibrating sieve is mounted with 2.2kw vertical vibrating motor.There are the diameter of 1800mm,two layer screen mesh with three dischange holes.Mainly used in screening material with high output.Accept customized service.
Automatic vibrating sieve is designed as a high-precision screening machinery. Electric vibrating sieve is composed of vertical motor,and eccentric weight installed at two ends.We can produce horizontal, vertical, inclined motions by adjusting the upper and lower eccentric weight.Diameter can be ranged from 400mm to 2000mm, with single or multiple screening decks(1-5 layers).Material can be divided into all carton steel,contact part stainless steel and all stainless steel.
Automatic vibrating sieve use upright motor as the source of vibration,equipped eccentricity hammer on the both sides of motor ,change circumrotate to level, upright and incline movement, then pass these three movement to the surface of the screen.Adjust the phasic angle on the both sides of the top and bottom to change the movement orbits of the surface screen.
Automatic vibrating sieve use upright motor as the source of vibration,equipped eccentricity hammer on the both sides of motor ,change circumrotate to level, upright and incline movement, then pass these three movement to the surface of the screen.Adjust the phasic angle on the both sides of the top and bottom to change the movement orbits of the surface screen.
►Features
♦ High efficiency,design is exquisite and durable, any powder mucoid screening.
♦ Easy to change screen, easy to operate and easy to clean.
♦ Mesh is not blocked,Powder is not float in the sky,Mesh to 500 mesh or 0.028 mm.
♦ Impurity,coarse material automatic discharge;Can connect operation.
♦ Unique network frame design, screen mesh use time long, fast to replace the network only for 3 to 5 minutes.
♦ Small volume, saving space, easy to move.
♦ Screen up to five layers.
►How to choose suitable automatic vibrating sieve?
Pls provide the following information for us:
Pls provide the following information for us:
1. material name, the density(kg/m3), water content(%).
2. the necessary capacity you required(per hour)
3. Machine material. Pls choose one:
a. All stainless steel 304
b. All carbon steel
c. The contacting part is stainless steel,the other parts is carbon steel or spraying plastic.
d.Contact part with plastic.
4. the dimension of the machine can be designed for you.
5. Additional parts ,like the mobil wheel, removing-dust hole and noise-proof base,can be easily fixed and maintained.
6. How many layers you need??
7. Pls inform the voltage&frequency in your city.
1, the motor should be fastened on the mounting surface, mounting surface must be smooth, flat.
2, the motor can be installed horizontally.
3, the electrical lead-core rubber cable with four-YZ-500V, then the power cable is not allowed when there is acute Lead off, and with the vibration of the body and firmly secured.
4, electrical grounding should be reliable, the motor grounding device, lead terminal signs, can also use foot bolts solid ground.
5, the exciting force adjustments.
